Description
please match your element with the photo on this page and the shape of the element,
Delonghi oven lower bake element AP1246GWT, 906GWF, D906GII, A1346G, APMFS,
DE60PYROS, DEL606P, DE607PSCP, DE609MP, APMFS, PMFPS60B, AP1246GWT, AP1246GWT, 906GWF, D906GII, A1346G, APMFS.
80438-A - OB60SDEPX1 FP NZ
80439-A - OB60SDEPM1 FP NZ
80636-A - OB60SDEPX2 FP AA
80637-A - OB60SDEPM2 FP AA
80704-A - OB60S9DEPM1 FP AA
80704-B - OB60S9DEPM1 FP AA IN
80705-A - OB60S9DEPX1 FP AA
80788-A - OB60S9DECPX1 FP AA
80788-B - OB60S9DECPX1 FP AA
80820-A - OB60S9DEPX2 FP AA
80820-B - OB60S9DEPX2 FP AA
80820-C - OB60S9DEPX2 FP AA
80704-B OB60S9DEPM1 FP AA
80820-C OB60S9DEPX2 FP AA
80704-A_OB60S9DEPM1_FP_AA
80788-B OB60S9DECPX1 FP AA
80820-B OB60S9DEPX2 FP AA
80820-A OB60S9DEPX2 FP AA
80788-A OB60S9DECPX1 FP AA
80705-A OB60S9DEPX1 FP AA
80636-A OB60SDEPX2 FP AA
80637-A OB60SDEPM2 FP AA
80439-A OB60SDEPM1 FP NZ
80438-A OB60SDEPX1 FP NZ
Dimensions - 32.5cm X 31cm. Distance from the front of the element to the mounting bracket - 32cm. Four 6.4mm spade terminals point up at 45 degrees. Mounting bracket hole spacing - 36cm. Distance between element ends on mounting bracket 15mm + 25mm + 15mm.
Need of product code and Model number? Model number ticker on most wall ovens should be beside the door seal or on the side of the door or Behind of oven, for the Freestanding oven nearby the door seal or behind the warmer (storage Draw) Door or behind of oven.
*NOTE: ELECTRONIC AND ELECTRICAL PARTS ARE NOT REFUNDABLE OR EXCHANGEABLE*
We highly recommend that you remove the faulty part and conduct a thorough comparison with the model number, photo, and dimensions provided above. If your model number is not listed, the part you have differs from the photo provided, or you are uncertain, kindly send your inquiry via email to info@homeappliancesonline.co.nz. We will respond promptly and provide you with the appropriate part.
574160, 062093004,