Description
DE50F56, DE45F56, AD39 AD39U AD52 AD52U AD53 AD55 ED52 ED52U ED54 ED54U ED55 ED55U ED56 ED56U all model like this and similar, DE35F56A, ED53-K, ED52-K,
How to install it on the wall
DE50F56E1,
AD39U, AD39,
AD53U,
AD55,
DE35F56AW,
DE35F56AW - 93101-A
DE45F56AW,
DE45F56EW,
DE45F56EW - 93108,
DE45F56EW -93108,
DE45F56EW - 93010,
DE45F56A - 93008,
DE45F56 - 93104-A,
DE45F56AW,
DE40F56A,
DE40F56A,
DE40F56 - 93212-A,
DE40F56 - 93188-A,
DE50F56A,
DE50F56E,
DE50F56A,
DE50F56A - 93234-A,
DE50F56A - 93216-A
DE60F60EW1,
DE50F56E - 93218-A,
ED55-U,
ED56, ED56 - 93215-B,
ED56, ED56AU - 93158-B,
ED57, ED57 - 93111-A,
1 x Galvanised wall bracket
2 x 50mm coach screws for mounting to timber framed wall
2 x 6.5mm x 60mm masonry bolts for mounting to concrete/brick walls
2 x PVC spacer legs
2 x 8 guage x 25mm self tappers to fix plastic spacer legs
Mounting brackets plus spacers to hold dryer level away from the wall. Mounting hardware such as dynabolts, loxins, etc are not included as the actual hardware required will depend on the type of wall the bracket is attached to.
If mounting to a plaster wall it is important to make sure the bracket is affixed securely to the upright wall studs either directly or via a horizontal piece of timber screwed to the studs. Instructions are not supplied with the item, but help can be provided by email or phone if required after purchasing.
Dryer Wall Mounting Bracket to suit Hoover, GE, Fisher & Paykel & Some Westinghouse & Kleenmaid Models.
Equivalent to 34628402, HD024.
Mounting bracket plus spacers to hold dryer away from the wall.
Appropriate for all Hoover, Fisher & Paykel and some GE & Kleenmaid models. Note the Kleenmaid models use a bracket that is wider than this so the bracket needs to be cut in half to work with these models.
5030D, 3235DB, 3530DB, 5030DB, K352DB, K503DB, DF008,
aa1700, p6450, p6013, 502067,
Note: This bracket only suits GE dryers made in NZ by Fisher & Paykel, not large commercial American GE models.
We highly recommend that you remove the faulty part and conduct a thorough comparison with the model number, photo, and dimensions provided above. If your model number is not listed, the part you have differs from the photo provided, or you are uncertain, kindly send your inquiry via email to info@homeappliancesonline.co.nz. We will respond promptly and provide you with the appropriate part.
Please note that selecting the wrong part is possible, but it may incur a 20% restocking fee imposed by the supplier, which will be passed on to you.