Home Home Appliances Spare Parts Spare Parts by Type Control Panel Oven,

oven control panel decal sticker SYMBOLS label 15,

$20.00 + FREIGHT & GST

Please Email Us For An ETA Sorry, there are only 3 of this item currently in stock. the selected product is not available.


Bosch Oven Spare Parts, Knob - Oven and Cooktop, Fisher & Paykel Oven Parts, Smeg Oven parts and Microwave, Simpson Oven and Cooktop Parts parts,, Baumatic Cooktop and Oven Parts, Westinghouse oven Parts, Elba Oven Stove Cooktop Parts, Everdure Appliances Parts, Delongi Oven and Cooktops Part, Electrolux Oven and Cooktop Parts,, indesit oven cooktop parts, Whirpool Oven COOKTOP AND MICROWAVE Parts, Asko Oven Parts,, CLASSIQUE OVEN PARTS, Nouveau Oven and cooktop Parts, Control Panel Oven,, Oven and Cooktop Decal Sticker,


Four stove dial/knob markings with numbers ranging from 0 through 6 with the zero positioned at 12 o'clock (AT THE TOP) and the numbers 1-6 positioned in an anticlockwise direction.
Please note these stickers are not calibrated or designed for any specific oven or stove. The buyer should check to ensure the sticker markings match those being replaced. Mismatched markings can be a safety hazard.
Please check the picture and your stove to ensure that these numbers match the rotational order of your stove. 
These stickers are not suitable if your existing numbers start with the zero at 9 o'clock - The numbers will be set sideways and look odd . These are designed to apply to the stove surface - they are not suitable for sticking onto knob bezels - for worn bezel markings buy new bezels 
Each transparent self adhesive sticker is sized with a 42mm inner diameter. * 
Please ensure the inside diameter of 42mm is suitable - measure the diameter of your dials before ordering. 
The outer diameter to the sticker's outer edge is 52mm (the circular strip of adhesive sticker is 5mm wide). 

 They are very easy to apply but before applying please ensure the oven surface is very clean and thoroughly dry before attempting to position the sticker. It will also help if all signs of the old markings are removed - be gentle when doing this so as to avoid scratching the stove surface
To apply simply peel the sticker from its paper backing (you might need to bend the backing slightly to allow the sticker to be peeled away) and apply to the stove's surface.  
Once in position, rub the sticker to remove any air bubbles.  The colour of the sticker design is either black which shows well on silver and light coloured backgrounds or white which shows well on dark surfaces such as black or green.  Please select your colour preference accordingly. 
Black print will not work with a black stove nor will white print on a white stove. 





We strongly recommend that you remove the part that is faulty and check it out. Compare carefully with the model number and photo and information above. If you don't see your model number here or the part you have is not similar to the above photo, or you are not sure, please send us your request by email to info@homeappliancesonline.co.nz We will reply back to you as soon as possible with the right part.

Selecting the wrong part and returning it is possible,


In order to assist us in reducing spam, please type the characters you see: