Description
Depending on availability, please refer to the shape of the seal in the main photos. This seal is the original part from another brand rather than the above-named brand, as they supply a complete inner door only. I recommend pulling out the faulty seal and comparing it with this photo: only one end will look like this.
Another recommendation for installation is to remove the front cover and the inner door from the hinge and perform the repair on a table.
Fits the following models
DW60CDW2, DW60CDX2, DW12-TFE2SS, DW12-TFE4WH, DW12-TFE4SS, HDW12-TFE3SS, HDW12-TFE3WH, DW60CDW3, DW60CDX3, DW60CSW1, DW60, DW60CSX1, DW60CDW1, DWCDX1, DW60CS, DW60CD, DW60CeW1, DW60CeX1, DW60CcW1, DWCcX1, hdw153g3x, hdw153g3w, DW60CHPX1, DW60CHPw1, DW60CKX1, DW60CKX1, HDW12-sfe1, HDW12-sfe3, DW60CDW2, HDW100wct, HDW100sct, DW60CRX2,DW60CRX3, DW60CRX4, DW60CRw3, DW12-TFE2WH, WQP12-AFM, WQP12-AFM-AFM2,
Delonghi DW47S, DW47W,
Classique Baumatic Dishwasher Lower Door Seal CLD60SS, cld60w BKD62w.3, BKDW60W, BKDW60SS,
Belini BDWM126W-F BDW86S & BDW86W ODW702X ODW707X ODW717X DWF146OLD
HDW201wh, hdw201ss, hdw100sst, wqp12afm, 61505, 61509, 61515, 61516,
61579, HDW12-TFE3SS, 61580, HDW12-SFE3WH, 61581, HDW12-TFE3WH, 61584, HDW12-SFE3SS, 80752, DW60CEX1, 80753, DW60CCW1, 80754, DW60CCX1, 80914, DW60CHW1, 80915, DW60CHX1, 80916, DW60CHPW1, 80917, DW60CHPX1, 80918, DW60CKW1, 80919, DW60CKX1, 81123, DW60FC2W1, 81124, DW60FC2X1, 81125, DW60FC4W1, 81126, DW60FC4X1, 81129, DW60FC1X1, 81130, DW60FC1W1, 81264, DW60FEX1, 81632, DW60FC4X1, 81633, DW60FC4W1, 81634, DW60FC2X1, 81635, DW60FC2W1, 81636, DW60FC1W1, 81130, DW60FC1W1, 81264, DW60FEX1, 81632, DW60FC4X1, 81633, DW60FC4W1, 81634, DW60FC2X1, 81635, DW60FC2W1, 81636, DW60FC1W1, 81637, DW60FC1W1, 85185, DW60CDW3, 85186, DW60CDX3, DW60CDX2, DW60CDw2, DW60CSW1, DW60CSW2, DW60CDW1, DW60CDW2, DL06-07ss, DW60CDX 2 EL NZ: 89137-A, Dw60, HDW9, HDW12, DW12,HDW300, HDW20, HDW101, HDW100, DW60CSX1, DW60CSX2, dw60cex1
OFI604A BFD645X, IVDB1 DWF614WE ED-D60CM14 DW60CRW2
How to Replace the Lower Door Seal on Fisher & Paykel and Haier Dishwashers
Replacing the lower door seal is a straightforward process. Follow these steps for a successful replacement:
Tools Needed:
- Screwdriver (usually Phillips)
- Replacement door seal
Steps:
-
Unplug the Dishwasher:
- Ensure the dishwasher is unplugged from the power source for safety.
-
Remove the Front Cover:
- Unscrew the eight screws that hold the front cover of the dishwasher door from the inner door section. Carefully detach the front panel.
-
Remove the Top Control Panel:
- If applicable, remove the screws or clips securing the top control panel and carefully lift it away.
-
Remove the Hinge Screws:
- Unscrew the screws that secure the hinge to the inner door. This may require holding the door at an angle.
-
Move the Inner Door:
- Carefully move the inner door to a flat, stable surface (like a workbench) for easier access.
-
Remove the Old Seal:
- Partially open the clip that holds the seal in place and gently pull out the old seal.
-
Install the New Seal:
- Position the new door seal in the designated groove. Ensure it is seated properly.
-
Secure the Seal:
- Press the clips back into place to secure the new seal.
-
Reassemble the Dishwasher:
- Return the inner door to its original position and reattach the hinge screws.
- Reinstall the top control panel and front cover, securing with screws.
-
Test the Dishwasher:
- Plug the dishwasher back in and run a short cycle to check for any leaks.
By following these steps, you should be able to successfully replace the lower door seal on your Fisher & Paykel or Haier dishwasher. If you encounter any issues, refer to your user manual for specific instructions related to your model.
We highly recommend that you remove the faulty part and conduct a thorough comparison with the model number, photo, and dimensions provided above. If your model number is not listed, the part you have differs from the photo provided, or you are uncertain, kindly send your inquiry via email to info@homeappliancesonline.co.nz. We will respond promptly and provide you with the appropriate part.
Please note that selecting the wrong part is possible, but it may incur a 20% restocking fee imposed by the supplier, which will be passed on to you.
lowerdoorseal, bottomdoorseal, 672002200324
