info@homeappliancesonline.co.nz | click here to contact us | 09 444 4803

Fisher Paykel Dishwasher PCB

(20 products)

Find a replacement Fisher Paykel dishwasher PCB for your dishwasher, with delivery across New Zealand. Search by your model number to see the boards that suit your model, or contact our team if you are unsure which one you need. Whether the controls have stopped responding or the dishwasher is showing a fault, a replacement board can be a practical alternative to replacing the whole appliance when the board is confirmed as the cause.
View as

Fisher Paykel Dishwasher PCB: Buyer's Guide

A Fisher Paykel dishwasher PCB is the electronic control board that runs your dishwasher, and we stock replacement boards with delivery across New Zealand. The printed circuit board (PCB) receives signals from the control panel and the sensors, then tells the rest of the machine what to do, including when to fill, wash, heat, drain and finish a cycle. Because it handles power and constantly deals with steam, moisture and heat, it can eventually fail. When it does, the dishwasher may stop responding, behave erratically or refuse to complete a cycle, even though the pump, motor and other parts are fine.

How to find the right PCB for your dishwasher

The most reliable way to choose the correct board is to start with your dishwasher's full model number. It is printed on the rating label, which on most dishwashers is found on the edge of the door or drawer, on the side panel or inside the cabinet. Your user guide will also show where to look on your model. Write down the whole number, including any letters, as small differences can mean a different board.

Once you have it, search for your model and compare it against the list of compatible models on each product page. If the board is already out of the machine, any part number printed on it can also help us confirm a match. If your model is not listed, or you are unsure, send our team your model number and a clear photo of the board and we will help you check before you order.

Common types of dishwasher control boards

Type What it is Signs it needs replacing
Main control board The central board that manages the wash cycle, water inlet, pump, drain and heating. Dishwasher will not start, stops partway through a cycle, or does not fill or drain when everything else checks out.
User interface or display board The board behind the control panel that reads button presses and shows cycle and fault information. Buttons do not respond, the display is blank or flickering, or the lights and codes look wrong.
Power or drive board (where fitted) A board that supplies power to or controls components such as the motor, on models that use a separate board. Intermittent faults, the dishwasher cutting out, or components not running when the control panel appears normal.

Not every model uses all of these boards, so check the product page for what suits your dishwasher. A fault that looks like a failed board can sometimes come from a wiring issue, a sensor or a water leak, so it is worth ruling those out first.

Fitting tips

  • Switch the dishwasher off at the wall and unplug it before you remove any panels, and turn off the water supply if you need to move the machine.
  • Take clear photos of the board and its connectors before disconnecting anything, so each plug goes back in the right place.
  • Handle the board by its edges and avoid touching the components or solder points, as static and moisture can damage it.
  • Look for signs of water damage, burnt marks or corroded connectors on the old board and fix any leak or wiring fault before fitting the new one.
  • Dishwashers run on mains electricity, so if you are not confident working on electrical appliances, use a licensed electrician or qualified appliance technician.

Related parts

If your dishwasher has other worn components, such as door seals, pumps, filters or spray arms, our team can help you find compatible replacement parts. Send us your model number and we will point you to the right ones.

Frequently asked questions

How do I know if I need a new Fisher Paykel dishwasher PCB?

Common signs include a dishwasher that will not start, stops mid-cycle, has unresponsive buttons or shows a blank or erratic display. These symptoms can also come from wiring, sensors or water leaks, so check those first or contact our team if you are unsure.

Where do I find my dishwasher model number?

Look for the rating label, usually on the edge of the door or drawer, on a side panel or inside the cabinet. Your user guide will show the exact location for your model.

Will this PCB fit my Fisher Paykel dishwasher?

Check the list of compatible models on the product page and match it against your full model number. If you are not sure, send us your model number and a photo of the board and we will help you confirm.

Can I replace a dishwasher control board myself?

Some people do, provided the dishwasher is unplugged and they are comfortable handling electronic parts. Because it involves mains electricity, we recommend a licensed electrician or qualified appliance technician if you have any doubts.

What should I do if my dishwasher model is not listed?

Contact our team with your full model number and a clear photo of the board, including any part number printed on it. We will help you check whether we have a suitable replacement.
Back to top