Elba and Fisher Paykel Chest Freezer Seal Gasket

$96.00 NZD
+ GST
SKU: 06691
Inventory / Availability Status:
Lead time of 2 - 5 + days if stock level not showing

Delivery / Pick Up and Returns

Pick Up:

All orders are available for pick up. Pick up orders can be collected warehouse at Unit 5, 3 William Pickering Drive, Albany, Auckland at no extra charge.

You will receive a second email when your order is ready for pick up, this is usually within 24 hours for in stock items, or as soon as your item arrives for backorder items (often 3 - 7 days).

Nationwide New Zealand Shipping:

Shipping is available nationwide and internationally. We ship with NZ Post and New Zealand Couriers and our average delivery time for orders in stock is 1 - 5 days, and 2 - 10 days for orders that are available with supplier.

Special Order products, such as those on backorder, have varying ETAs. Please contact us if you want to check before ordering. Some parts (that come from Europe, America, or other overseas locations) can take a little while.

International Orders:

We offer shipping to international locations but not all countries and products are supported. Generally, if you are an international customer and you can select your country and address at checkout, it means we can ship that product to you. Please get in touch with us if you want further information.

If you want to be 100% certain about an ETA for a product, just send us a quick email or call and we'll get back to you ASAP with our best estimate. Thanks!

Returns:

If your order has not been picked up or shipped yet, you can cancel your order for a full refund.

If you have already received a part and it is incorrect or you no longer need it, you must let us know within 14 days of receiving your part.

NOTE FOR ALL RETURNS: You must notify us before sending a part back and get approval for returns. Parts that are sent back without notifying us in advance may not be approved for refund or return and you will be responsible for return shipping to get this part back to you.

We do not accept returns on electrical products, but may offer exchange / refund on other parts. The parts must not be used, damaged, or opened (on parts in packaging) and will be subject to restocking fees of 20% (depending on the part). This fee applies to all returns.

If you have received a faulty or damaged product, we will always offer a replacement (or refund depending on availability) at no cost to you.

Backorder Items:

As there are 100,000+ different SKUs we are able to source, we are unfortunately not able to stock all the parts that customers may need. Many parts will have to be ordered in from their respective suppliers and have varying lead times depending on the brand and part. For most parts, this is about 2 - 7 working days, however for some international brands or parts which are on backorder, there can be an extended lead time of 2 - 12+ weeks. If you are not happy to wait for your order, please get in touch with us and we can give you an ETA or cancel/refund your order for you right away.

Elba and Fisher Paykel Chest Freezer Seal Gasket

H360S R FP WH 02 21105,
H360SL R FP WH 02 21111,
H360SL R FP WH 08 21132,
H360X R FP WH 12 20981,
H360XL R FP WH 02 21117,
H360XL R FP WH 08 21132-,
RC360 21319-A,


Please check carefully, this seal is suitable only for the model numbers listed above. It is a push-in type.

Lift your existing freezer seal and inspect how it is fitted. If it is secured with screws and a metal retaining bar, this seal will not be compatible with your freezer. Unfortunately, that screw-in type is no longer available. The model number sticker is typically located behind the freezer door.

After installing the new seal, you will need to use a hair dryer (do not use a heat gun) to help the seal reshape properly. First, with the door open, gently warm the inner side of the seal. Then, close the door and heat the seal again, starting from one corner and working your way around.

In some areas, you may need to assist the seal to sit correctly and magnetise. You can do this by gently pushing the seal toward the cabinet using a wooden stick or a similar tool while applying heat with the hair dryer.

Once the installation is complete, do not open the door for at least two hours to allow the seal to set properly.

 



We highlyrecommend that you remove the faulty part and conduct a thorough comparison with the model number, photo, and dimensions provided above. If your model number is not listed, the part you have differs from the photo provided, or you are uncertain, kindly send your inquiry via email toinfo@homeappliancesonline.co.nz. We will respond promptly and provide you with the appropriate part.

Please note that selecting the wrong part is possible, but it may incur a 20% restocking fee imposed by the supplier, which will be passed on to you.

 






883048P,