Electrolux Westinghouse Freezer Door Seal 140015388204 – Replaces 811988544
Inventory / Availability Status:
Rare to Sell - Available with the Supplier (ETA 5-10 Days after placing order)
Couldn't load pickup availability
Delivery / Pick Up and Returns
Delivery / Pick Up and Returns
Pick Up:
All orders are available for pick up. Pick up orders can be collected warehouse at Unit 5, 3 William Pickering Drive, Albany, Auckland at no extra charge.
You will receive a second email when your order is ready for pick up, this is usually within 24 hours for in stock items, or as soon as your item arrives for backorder items (often 3 - 7 days).
Nationwide New Zealand Shipping:
Shipping is available nationwide and internationally. We ship with NZ Post and New Zealand Couriers and our average delivery time for orders in stock is 1 - 5 days, and 2 - 10 days for orders that are available with supplier.
Special Order products, such as those on backorder, have varying ETAs. Please contact us if you want to check before ordering. Some parts (that come from Europe, America, or other overseas locations) can take a little while.
International Orders:
We offer shipping to international locations but not all countries and products are supported. Generally, if you are an international customer and you can select your country and address at checkout, it means we can ship that product to you. Please get in touch with us if you want further information.
If you want to be 100% certain about an ETA for a product, just send us a quick email or call and we'll get back to you ASAP with our best estimate. Thanks!
Returns:
If your order has not been picked up or shipped yet, you can cancel your order for a full refund.
If you have already received a part and it is incorrect or you no longer need it, you must let us know within 14 days of receiving your part.
NOTE FOR ALL RETURNS: You must notify us before sending a part back and get approval for returns. Parts that are sent back without notifying us in advance may not be approved for refund or return and you will be responsible for return shipping to get this part back to you.
We do not accept returns on electrical products, but may offer exchange / refund on other parts. The parts must not be used, damaged, or opened (on parts in packaging) and will be subject to restocking fees of 20% (depending on the part). This fee applies to all returns.
If you have received a faulty or damaged product, we will always offer a replacement (or refund depending on availability) at no cost to you.
Backorder Items:
As there are 100,000+ different SKUs we are able to source, we are unfortunately not able to stock all the parts that customers may need. Many parts will have to be ordered in from their respective suppliers and have varying lead times depending on the brand and part. For most parts, this is about 2 - 7 working days, however for some international brands or parts which are on backorder, there can be an extended lead time of 2 - 12+ weeks. If you are not happy to wait for your order, please get in touch with us and we can give you an ETA or cancel/refund your order for you right away.
Electrolux Westinghouse Freezer Door Seal 140015388204 – Replaces 8...
Search description
Type your model number to search our description and see whether it is listed as compatible with this part.
SKU: HA88204
Replacement magnetic freezer door gasket for selected Electrolux and Westinghouse refrigerators. This gasket fits around the freezer door to help retain cold air and prevent warm, moist air from entering. Replacing a torn, hardened or distorted seal can help reduce air leaks, condensation and frost caused by poor door sealing.
Part 811988544 has been replaced by 140015388204. The manufacturer interchangeability document confirms this replacement.
Key Features
- Current part number: 140015388204
- Previous part number: 811988544
- Additional supplier-listed reference: 8119885443
- Magnetic freezer-compartment door gasket
- BF70 seal reference
- Dimensions supplied: 650 mm wide × 580 mm high, magnet to magnet
- Freezer seal only; fridge-compartment gasket supplied separately
The reference 8119885443 is also cross-listed against this replacement.
Size and Measurement
| Measurement | Dimension |
|---|---|
| Width, magnet to magnet | 650 mm |
| Height, magnet to magnet | 580 mm |
These are the measurements you supplied. Measure the original using the same magnet-to-magnet method. Outside rubber-edge measurements may differ.
Check the mounting profile and complete appliance product number as well as the dimensions before ordering.
Common Signs You May Need a Replacement
- Split, torn or hardened gasket
- Visible gaps around the closed freezer door
- Frost or ice developing near an air leak
- Condensation around the door opening
- A twisted or compressed seal that no longer makes even contact
Check door alignment, hinges and drawer obstructions first. A new gasket will not correct a sagging or damaged door.
Compatible with the following models:
| Brand | Model | PNC/product number |
|---|---|---|
| Electrolux | EBE4507SA-R | Confirm from appliance label |
| Electrolux | EBE4507SB-L | 92506042200 |
| Electrolux | EBE4507SB-R | 92506042100 |
| Electrolux | ETE4607SB-L | 92506041800 |
| Electrolux | ETE4607SB-R | 92506041700 |
WBE4500SA-L WBE4500SA-R WBE4500WA-L WBE4500WA-R WBE4504SA-L WBE4504SA-R
supplier-listed for this replacement. The other models’ parts manuals identify the original 811988544 freezer gasket.
Compatibility – check model label and PNC
Confirm the complete model, left/right suffix and PNC before ordering. The fridge seal’s model list should not automatically be copied to this freezer seal.
How to Install
- Compare the replacement with the original before removal. Check dimensions, corners and mounting profile.
- Unplug the appliance and protect frozen food from thawing.
- Photograph the original gasket and inspect its attachment method.
- For a confirmed removable push-in seal, gently release the retaining bead from its channel. Stop if the seal appears bonded or trapped beneath the door liner.
- Clean the mounting channel with mild detergent and warm water, then dry thoroughly.
- Position the replacement without stretching it. Seat the corners, then progressively press the retaining bead into the channel.
- Close the door gently and check for folds, twists or gaps around the entire perimeter.
- Use a strip of paper at several points to check for reasonably even sealing resistance.
Do not cut the old gasket or apply adhesive unless the instructions for your exact door require it. Electrolux uses different gasket attachment methods across its appliances.
Allow packaging folds to relax at room temperature before installation. Avoid boiling water, heat guns and concentrated high heat. If the gasket will not seat evenly, have an appliance technician check the fit and door alignment.
Care and Maintenance
Clean the gasket and cabinet contact surface regularly with mild detergent and warm water. Wipe dry, including inside the folds. Avoid sharp tools, abrasive cleaners and pulling on the gasket to open the door.
If unsure, email your appliance model label and seal measurements to info@homeappliancesonline.co.nz before ordering.
