Oven Control Panel Decal Sticker Symbols Label 5

WHAT YOU GET IS
Four stove cooker knob gradient lines in an anticlockwise direction. Please check the listing picture to ensure that what you are buying matches the markings on your stove/oven and that the diameter and direction of the gradient is suitable.
These stickers are not calibrated to any specific oven. You will need to check your oven to ensure your oven dial numbers match the sticker image above. Mismatched markings can be a safety hazard.
Each transparent self adhesive sticker is sized with a 50MM inner diameter extending to 60MM outer diameter to the sticker's outer edge (the sticker is 5MM wide). In the black on white picture, the edge of each sticker is outlined in magenta but this is only for illustrative purposes to show the outer dimensions. The magenta coloured lines are not printed on the version you receive.
These are designed to apply to the stove surface - they are not suitable for sticking onto knob bezels - for worn bezel markings buy new bezels
The stickers are designed to replace worn stove markings. They are reasonably hard wearing but whether they are as hard wearing as the original manufacturer's applied version - only time will tell - but so far so good.
They are made of heat resistant material and will withstand boiling water and will self extinguish if subjected to a flame test. The print is protected by a thin layer of transparent vinyl and as a consequence they are able to withstand normal cleaning with a cloth.
They are very easy to apply but before applying please ensure the oven surface is very clean and thoroughly dry before attempting to position the sticker.
Then simply peel off the sticker from its paper backing (you might need to bend the backing slightly to allow the sticker to be peeled away) and apply to the oven's surface.
Once in position, rub the sticker to remove any air bubbles. The colour of the sticker design is either black which shows well on silver and light coloured backgrounds or white which shows well on dark surfaces such as black or green. Please select your colour preference accordingly.

Black print will not work with a black stove nor will white print on a white or silver stove.

PARTS ARE NON RETURNABLE FOR REFUND OR EXCHANGE*

We stronglyrecommend that you remove the part that is faulty and check it out. Compare carefully with the model number and photo and information above. If you don't see your model number here or the part you have is not similar to the above photo, or you are not sure, please send us your request by email toinfo@homeappliancesonline.co.nzWe will reply back to you as soon as possible with the right part.

Selecting the wrong part and returning it is possible,