Electrolux Westinghouse Fridge Door Seal 140015388212 – Replaces 811988546
Inventory / Availability Status:
Rare to Sell - Available with the Supplier (ETA 5-10 Days after placing order)
Couldn't load pickup availability
Delivery / Pick Up and Returns
Delivery / Pick Up and Returns
Pick Up:
All orders are available for pick up. Pick up orders can be collected warehouse at Unit 5, 3 William Pickering Drive, Albany, Auckland at no extra charge.
You will receive a second email when your order is ready for pick up, this is usually within 24 hours for in stock items, or as soon as your item arrives for backorder items (often 3 - 7 days).
Nationwide New Zealand Shipping:
Shipping is available nationwide and internationally. We ship with NZ Post and New Zealand Couriers and our average delivery time for orders in stock is 1 - 5 days, and 2 - 10 days for orders that are available with supplier.
Special Order products, such as those on backorder, have varying ETAs. Please contact us if you want to check before ordering. Some parts (that come from Europe, America, or other overseas locations) can take a little while.
International Orders:
We offer shipping to international locations but not all countries and products are supported. Generally, if you are an international customer and you can select your country and address at checkout, it means we can ship that product to you. Please get in touch with us if you want further information.
If you want to be 100% certain about an ETA for a product, just send us a quick email or call and we'll get back to you ASAP with our best estimate. Thanks!
Returns:
If your order has not been picked up or shipped yet, you can cancel your order for a full refund.
If you have already received a part and it is incorrect or you no longer need it, you must let us know within 14 days of receiving your part.
NOTE FOR ALL RETURNS: You must notify us before sending a part back and get approval for returns. Parts that are sent back without notifying us in advance may not be approved for refund or return and you will be responsible for return shipping to get this part back to you.
We do not accept returns on electrical products, but may offer exchange / refund on other parts. The parts must not be used, damaged, or opened (on parts in packaging) and will be subject to restocking fees of 20% (depending on the part). This fee applies to all returns.
If you have received a faulty or damaged product, we will always offer a replacement (or refund depending on availability) at no cost to you.
Backorder Items:
As there are 100,000+ different SKUs we are able to source, we are unfortunately not able to stock all the parts that customers may need. Many parts will have to be ordered in from their respective suppliers and have varying lead times depending on the brand and part. For most parts, this is about 2 - 7 working days, however for some international brands or parts which are on backorder, there can be an extended lead time of 2 - 12+ weeks. If you are not happy to wait for your order, please get in touch with us and we can give you an ETA or cancel/refund your order for you right away.
Electrolux Westinghouse Fridge Door Seal 140015388212 – Replaces 81...
Search description
Type your model number to search our description and see whether it is listed as compatible with this part.
Replacement magnetic food-compartment door gasket for selected Electrolux, Westinghouse and Kelvinator refrigerators. This seal fits around the fridge door to help retain cold air and prevent warm, moist air from entering. Replacing a split, hardened or distorted gasket can restore an effective door seal when the hinges and door alignment are in good condition.
Part 811988546 has been replaced by 140015388212. The manufacturer interchangeability document confirms this replacement.
Key Features
- Current part number: 140015388212
- Previous part number: 811988546
- Additional supplier-listed reference: 8119885468
- Magnetic fridge / food-compartment door seal
- BF70 gasket reference
- Dimensions supplied: 650 mm wide × 979 mm high, magnet to magnet
- Fridge-compartment gasket; order the freezer gasket separately
The additional reference 8119885468 is listed by an authorised Electrolux parts distributor.
Size and Measurement
| Measurement | Dimension |
|---|---|
| Width, magnet to magnet | 650 mm |
| Height, magnet to magnet | 979 mm |
These are the measurements you supplied. Compare using the same magnet-to-magnet method; the outside rubber edges may measure differently. Dimensions alone do not establish compatibility—also check the mounting profile and complete appliance product number.
Common Signs You May Need a Replacement
- Split, torn or hardened rubber
- Visible gaps around the closed door
- Condensation near the door opening
- Cold air escaping around the gasket
- A seal that remains distorted after cleaning and checking alignment
A sagging door, damaged hinge or obstruction can also prevent proper sealing. Replacing the gasket will not correct those faults.
Compatible with the following models:
| Brand | Model | PNC/product number |
|---|---|---|
| Kelvinator | KBM4502WC-R | 92506080900 |
| Westinghouse | WBE4500BB-L | 92506066600 |
| Westinghouse | WBE4500BB-R | 92506066500 |
| Westinghouse | WBE4500BC-L | 92506085100 / 92506085102 |
| Westinghouse | WBE4500SC-L | 92506084700 / 92506084702 |
| Westinghouse | WBE4500SC-R | 92506084600 / 92506084602 |
| Westinghouse | WBE4500WB-R | Confirm from appliance label |
| Electrolux | EBE4507SA-R | 92506010400 |
| Electrolux | EBE4507SB-L | 92506042200 |
| Electrolux | EBE4507SB-R | 92506042100 |
| Electrolux | ETE4607SB-L | 92506041800 |
| Electrolux | ETE4607SB-R | 92506041700 WBE4500SA-L WBE4500SA-R WBE4500WA-L WBE4500WA-R WBE4504SA-L WBE4504SA-R |
These exact models are supplier-listed against 140015388212. Check the complete model suffix and PNC before ordering.
How to Install
- Check the replacement against the original before removing anything. Confirm its size, corners and mounting profile.
- Unplug the refrigerator and protect temperature-sensitive food.
- Photograph the old gasket and inspect how it attaches. Some seals press into a channel; others are retained beneath a liner or require a specific replacement procedure.
- For a confirmed removable push-in seal, gently release the old retaining bead from the channel. Do not force a seal that appears bonded or trapped beneath the liner.
- Clean the mounting channel with mild detergent and warm water, then dry it.
- Position the replacement without stretching it. Seat the corners, then progressively press the retaining bead into the channel around the door.
- Close the door gently and inspect the entire perimeter for twists, folds or gaps.
- Check sealing resistance with a strip of paper at several points. Recheck door alignment if resistance is uneven.
Do not cut the original gasket or use adhesive unless the instructions for your exact door require it. Electrolux publishes different fitting procedures for different door constructions, including some that require cutting the old seal.
Allow packaging folds to relax at room temperature before fitting. Avoid boiling water, heat guns or concentrated high heat. If the seal will not sit evenly, have an appliance technician check the profile, installation and door alignment.
Care and Maintenance
Clean regularly with mild detergent and warm water, including between the folds. Wipe dry and remove food residue from the cabinet contact surface. Avoid sharp tools and abrasive cleaners.
If unsure, email the model label and measurements to info@homeappliancesonline.co.nz before ordering.
Meta title: Electrolux Westinghouse Fridge Seal 140015388212
Meta description: Fridge door gasket 140015388212 replaces 811988546. Magnet-to-magnet size 650 × 979 mm. Check model, PNC and seal profile before ordering.
