Contact Us: info@homeappliancesonline.co.nz | 09 444 4803 | or click here to contact us
1 2

Microwave Oven Fuse 12A Slow Below, *001019

$14.95 NZD
+ GST
SKU: 11670M
Inventory / Availability Status:
In stock 1-5 day to deliver

Delivery and Pick Up Information

Pick Up:

All orders are available for pick up. Pick up orders can be collected warehouse at Unit 6, 21 Poland Road, Wairau Valley, Auckland at no extra charge.

You will receive a second email when your order is ready for pick up, this is usually within 24 hours for in stock items, or as soon as your item arrives for backorder items (often 3 - 7 days).

Nationwide New Zealand Shipping:

Shipping is available nationwide and internationally. We ship with NZ Post and New Zealand Couriers and our average delivery time for orders in stock is 1 - 5 days, and 2 - 10 days for orders that are available with supplier.

Special Order products, such as those on backorder, have varying ETAs. Please contact us if you want to check before ordering. Some parts (that come from Europe, America, or other overseas locations) can take a little while.

International Orders:

We offer shipping to international locations but not all countries and products are supported. Generally, if you are an international customer and you can select your country and address at checkout, it means we can ship that product to you. Please get in touch with us if you want further information.

If you want to be 100% certain about an ETA for a product, just send us a quick email or call and we'll get back to you ASAP with our best estimate. Thanks!

MICROWAVE FUSE CM1039/XEF, CM1049/XEU, CM1089/SA, CM1099/SA, FW87KST/XSA, M1817N/XSA, M183ST/XSA, MC35J8088LT/SA, ME0103MB/XSA, ME103H/XSA, ME1113TST/XSA, ME1113TST1/XSA, ME1113TW/XSA, ME6104ST/XSA, ME6104ST1/XSA, ME6104W/XSA, ME6104W1/XSA, ME6124ST-1/XSA, ME6124ST/RAD, ME6124ST/XSA, ME6124W-1/XSA, ME6124W/XSA, ME6144ST/RAD, ME6144ST/XSA, ME6144W/XSA, ME83D-W/XSA, ME83Z/XSA, ME9114ST/XSA, ME9114W/XSA, MR89-S/XEF, MS103HCE-5/RAD, MS103HCE-5/XSA, MS103HCE/XSA, MS103HCE5S/RAD, MS103HCE5S/XSA, MS123HCE/RAD, MS123HCE/XSA, MS123SCE-1/XSA, MS123SCE/RAD, MS123SCE/XSA, MS143HCE/RAD, MS143HCE/XSA, MS143SCE/XSA, MS32H5125AK/SA, MS32J5133BM/SA, MS32J5133BT/SA, MS34F606MAT/SA, MS40J5133BT/SA, MS6104W/XSA, MS83HCE-S/XSA, MS83HCE/XSA, MW0113MAB/XSA, MW0113MB/XSA, MW103H/XSA, MW107L-S/XSA, MW108L-S/XEF, MW123H/RAD, MW123H/XSA, MW123ST/RAD, MW123ST/XSA, MW8123ST/XSA, MW8123W/XSA, MW83Z/XSA, MW87L-S/XEF, MW87L-S/XSA, MW9114ST/XSA, MW9114W-B/XSA, MW9114W/XSA
OMEGA SMEG MICROWAVE CERAMIC FUSE 12A, MWF036 SUIT SA311M OA138X SA985CX SA311M,




High quality replacement type12A 32MMuse for modern microwave ovens.
This type of fuse is commonly found in many brands of microwave ovens. It is normally used as the mains input fuse and is designed to fail if there is a fault. Such a fault could be a short circuit magnetron or a short circuit high voltage rectifier. In our experience however this fuse commonly fails for no apparent reason. The fuse just gets stressed everytime the magnetron starts which eventually leads to the demise of the fuse.
If you have a microwave with this type of fuse then the symptom you will get if it has failed is generally a completely dead machine. Sometimes however you may get a no cooking action fault depending on what part of the circuit the fuse is fitted.
This particular type of fuse is sand filled and is not clear glass like other fuses. It is important to replace a fuse in a microwave with this type as it will not explode in the event of a fault. This fuse is also designed to withstand the high surge currect that flows when a microwave is started. It has a rating T12A where the T indicates a time lag or slow blow blow fuse. A standard fast blow fuse would fail immediately at switch on or very soon thereafter if you fitted it as only the T type fuse can withsatnad the high inrush current when a microwave oven starts. In order to check the fuse you need to use an ohm meter or a continuity tester. A zero ohm reading will be obtained for a working fuse.
If you fit a new fuse and it fails immediately then you have another fault and you should consult a microwave engineer.
If you require a microwave fuse then carefully check the fuse value by looking at the tip of the fuse. The current rating is printed on one of the silver caps. The fuse value should also be printed on the circuit board beside the fuse holders. Also measure the fuse length. 20MM and 32MM are the common lengths. In our microwave parts section you will find the most common types listed.
This is the technical specification of the fuse:
  • Current rating T12A delay type
  • Voltage rating 250V
  • Overall length of fuse 32MM
  • Fuse type cartridge
This type of fuse is fitted to many brands of microwaves and this particular type of fuse is suitable for replacement in any brand.


*NOTE ELECTRONIC and ELECTRICAL PARTS ARE NON RETURNABLE FOR REFUND OR EXCHANGE*

We Stronglyrecommend you to remove the part which is faulted and check it out and compare carefully with model number and photo and Information above, if you dont see your model number here or the part you have isnt similar to above photo or you are not sure , please send us your request by email toinfo@homeappliancesonline.co.nzwe will reply back to you asap with offering right part.










3601-001019, 3601001019,
Back to top