info@homeappliancesonline.co.nz | click here to contact us | 09 444 4803

Pizza Oven Electric EGO 55.19082.802 500C 508C Pizza Oven Thermostat 16A 250V Cuppone Fimar

$195.00 NZD
+ GST
SKU: 55566
Inventory / Availability Status:
Rare to Sell - Available with International Supplier (ETA 2 - 4 weeks after placing order)
Part Categories: Oven Parts | Oven Thermostats

Delivery / Pick Up and Returns

Pick Up:

All orders are available for pick up. Pick up orders can be collected warehouse at Unit 5, 3 William Pickering Drive, Albany, Auckland at no extra charge.

You will receive a second email when your order is ready for pick up, this is usually within 24 hours for in stock items, or as soon as your item arrives for backorder items (often 3 - 7 days).

Nationwide New Zealand Shipping:

Shipping is available nationwide and internationally. We ship with NZ Post and New Zealand Couriers and our average delivery time for orders in stock is 1 - 5 days, and  2 - 10 days for orders that are available with supplier. 

Special Order products, such as those on backorder, have varying ETAs. Please contact us if you want to check before ordering. Some parts (that come from Europe, America, or other overseas locations) can take a little while.

International Orders:

We offer shipping to international locations but not all countries and products are supported. Generally, if you are an international customer and you can select your country and address at checkout, it means we can ship that product to you. Please get in touch with us if you want further information.

If you want to be 100% certain about an ETA for a product, just send us a quick email or call and we'll get back to you ASAP with our best estimate. Thanks!

Returns:

If your order has not been picked up or shipped yet, you can cancel your order for a full refund. 

If you have already received a part and it is incorrect or you no longer need it, you must let us know within 14 days of receiving your part. 

NOTE FOR ALL RETURNS: You must notify us before sending a part back and get approval for returns. Parts that are sent back without notifying us in advance may not be approved for refund or return and you will be responsible for return shipping to get this part back to you.

We do not accept returns on electrical products, but may offer exchange / refund on other parts. The parts must not be used, damaged, or opened (on parts in packaging) and will be subject to restocking fees of 20% (depending on the part). This fee applies to all returns.

If you have received a faulty or damaged product, we will always offer a replacement (or refund depending on availability) at no cost to you.

Backorder Items:

As there are 100,000+ different SKUs we are able to source, we are unfortunately not able to stock all the parts that customers may need. Many parts will have to be ordered in from their respective suppliers and have varying lead times depending on the brand and part. For most parts, this is about 2 - 7 working days, however for some international brands or parts which are on backorder, there can be an extended lead time of 2 - 12+ weeks. If you are not happy to wait for your order, please get in touch with us and we can give you an ETA or cancel/refund your order for you right away. 

Search description

Type your model number to search our description and see whether it is listed as compatible with this part.

EGO 55.19082.802 capillary thermostat for temperature regulation in selected commercial pizza ovens. This single-pole mechanical thermostat is associated with selected Cuppone, Fimar, Electrolux and Zanussi ovens. It senses oven temperature through a remote bulb and switches the heating circuit as required. Match the original thermostat number, temperature range, mounting arrangement and sensor dimensions before ordering.

Key Features

  • EGO reference: 55.19082.802 / 5519082802
  • Single-pole mechanical temperature control
  • Listed electrical rating: 16A 250V
  • Commonly catalogued operating range: approximately 75–500°C
  • EGO drawing specifies nominal endpoints of 75°C and 508°C
  • Sensor bulb approximately 4 mm diameter × 228 mm long
  • Capillary approximately 870–900 mm long
  • Control shaft approximately 6 × 4.6 mm with 23 mm projection
  • Supplied as one thermostat
  • Common Signs You May Need a Replacement
  • Oven fails to reach the selected temperature
  • Heating continues beyond the selected temperature
  • Temperature regulation becomes inconsistent
  • Thermostat contacts fail to switch
  • Sensor bulb or capillary is damaged

These symptoms can also result from other faults. Have the thermostat and heating circuit checked before replacing parts.

Installation

Installation must be completed by a qualified technician. Isolate the electrical supply, record the existing connections and compare both thermostats before fitting. Position the sensor in its original location and route the capillary without kinking, crushing or cutting it. Check the oven temperature and thermostat operation after installation.

Compatibility

Compare the appliance model and product code with the original thermostat markings. Check the temperature range, electrical rating, shaft, terminals, sensor dimensions and capillary length. A matching brand alone does not confirm compatibility.

Compatible with the following models:

Cuppone

BASE 520-1 BASE 520-2 BASE 520-3 BASE 620-1 BASE 620-2 BASE 620-3 BASE 720-1.4 BASE 720-1.6 BASE 720-2.4 BASE 720-2.6 BASE 720-3.4 BRUTUS BT520 BRUTUS BT520-2 MICRO PAOLO P4 PAOLO P6 PAOLO P9 TIZIANO TZ420-1 TIZIANO TZ420-1M TIZIANO TZ425-1 TIZIANO TZ425-1M TIZIANO TZ425-2 TIZIANO TZ425-2M TIZIANO TZ430-1 TIZIANO TZ430-1M TIZIANO TZ430-2 TIZIANO TZ430-2M TIZIANO TZ435-1 TIZIANO TZ435-1M TIZIANO TZ435-2 TIZIANO TZ435-2M

Fimar

FM4 FM44 FM6 FM66 FM9 FME4 FME44 FME6 FME66 FME9 FME99 FMEW6 FML4 FML44 FML4-4 FML6 FML66 FML6-6 FML9 FML99 FML9-9 FMLW6 FMLW66 FMLW6-6 FMS4 FMS44 FMS6 FMS66 FMS9 FY4 FY44 FYE6 FYE66 FYL4 FYL44 FYL4-4 FYL6 FYL66 FYL6-6 MICRO 1C MICRO 2C MICROV 1C MICROV 2C MINI PICCOLO

Electrolux

FP/E18 (770589) FP/E30 (770588) FPE18 (291449) FPE30 (291448) FZ/E18 (770585) FZ/G18 (770581) FZE18 (291445) FZG18 (291441)

Zanussi

FP/E18 (770589) FP/E30 (770588) FPE18 (291449) FPE30 (291448) FZ/E18 (770585) FZ/G18 (770581) FZE18 (291445) FZG18 (291441)

Cross-reference part numbers

These are reference numbers for checking the replacement part, rather than appliance model numbers.

EGO: 55.19082.802 5519082802 5519082302 5173948130 6473948160

Cuppone: 39CU035 57100 91310003 ME0000300

Fimar: CO3601 6473948160

Electrolux: 056701 56701 6473948160

Emmepi: 808542 6473948160

GEV: 375247

LF: 3444305

Modular: 661.121.00

Prismafood: 5T010001

Other supplied catalogue references: TERMO001 GAS540 101001 EGO50092 LF3444305 5900042

 
Back to top